Hex Inverter - IK Semiconductor
Description
TECHNICAL DATA
Quad 2-Input AND Gate
IN74VHC08 is high-speed logic IC made by CMOS technology and designed for use in high-performance calculating systems with a wide supply voltage range.
As for operation speed, IN74VHC08 can be compared with equivalent bipolar ICs based on Schottky TTL and two times surpasses ICs of IN74НС series.
IN74VHC08 tolerates operation under conditions when voltage on input is exceeded up to 7V without affecting characteristics and IC reliability.
This possibility allows to use IN74VHC08 in radio-electronic devices for interfacing with supply voltages 5V and 3V, eliminate IC failure under supply voltage source emergency outage.
Use of output edge shaping block in the microcircuit allows to reduce noise amplitude of noises when switching outputs into the same state simultaneously.
Input and output levels of IN74VHC08 are compatible with CMOS levels
IN74VHC08
ORDERING INFORMATION IN74VHC08N Plastic IN74VHC08D SOIC TA = -40° to 85° C for all packages
• • • • • .
w
w
w
.
d
e e h s a t a
.
u t4
m o c
1
www.
DataSheet4U.
com
• • • • •
Features: Supply voltage range 2.
0 to 5.
5 V.
Output current 8 mA.
Low consumption current: 0.
2 mkA (typical value) at Та = 25 °С.
Latchup current not less than 300 mA at Та = 85 °С.
Tolerable value of static potential not less than 2000 V as per human body model (HBM) and not less than 200 V as per machine model (ММ).
Ambient operation temperature minus 40 to plus 85 °С.
Balanced signal propagation delay.
Ensures voltage exceeding mode on input Low noise level at the simultaneous switching of outputs in the same state: VOLP = 0.
8 V (max).
For pins and functions, compatible with IN74НС08.
IN74VHC08
IN74VHC08 truth table
Input Output
A L L H H
B L H
L
Y= А*В L L L H
H
Note – H - high voltage level; L - low voltage level;
Pinout
A1 01
14
Vcc B4 A4 Y4 B3 A3 Y3
B1 02
13
Y1 03
12
A2 04
11
B2 05
10
Y2 06
09
GND 07
08
Pins description in IN74VHC08
Pin No.
01 02 03 04 05 06 07 08 09 10 11 1...
Similar Datasheet
