DatasheetsPDF.com

SA130A

Bytes
Part Number SA130A
Manufacturer Bytes
Description 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS
Published May 17, 2005
Detailed Description SA5.0 THRU SA180CA 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS VOLTAGE RANGE 5.0 to 180 Volts FEATURES * 500 ...
Datasheet PDF File SA130A PDF File

SA130A
SA130A


Overview
SA5.
0 THRU SA180CA 500 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS VOLTAGE RANGE 5.
0 to 180 Volts FEATURES * 500 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.
0ps from 0 volt to BV min.
* Typical IR less than 1µA above 10V * High temperature soldering guaranteed: 260 C / 10 seconds / .
375"(9.
5mm) lead length, 5lbs.
(2.
3kg) tension 500 Watts Peak Power 3.
0 Watts Steady State DO-15 .
140(3.
6) .
104(2.
6) DIA.
1.
0(25.
4) MIN.
MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Axial leads, solderable per MIL-STD-202, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any * Weight: 0.
40 grams .
300(7.
6) .
230(5.
8) .
034(.
9) .
028(.
7) DIA.
1.
0(25.
4) MIN.
Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified.
Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATINGS Peak Power Dissipation at TA=25 C, TP=1ms(NOTE 1) Steady State Power Dissipation at TL=75 C Lead Length .
375"(9.
5mm) (NOTE 2) Peak Forward Surge Current at 8.
3ms Single Half Sine-Wave superimposed on rated load (JEDEC method) (NOTE 3) Operating and Storage Temperature Range SYMBOL PPK PD IFSM TJ, TSTG VALUE Minimum 500 3.
0 70 -55 to +175 UNITS Watts Watts Amps C NOTES: 1.
Non-repetitive current pulse per Fig.
3 and derated above TA=25 C per Fig.
2.
2.
Mounted on Copper Pad area of 1.
6" X 1.
6" (40mm X 40mm) per Fig.
5.
3.
8.
3ms single half sine-wave, duty cycle = 4 pulses per minute maximum.
DEVICES FOR BIPOLAR APPLICATIONS 1.
For Bidirectional use C or CA Suffix for types SA5.
0 thru SA180.
2.
Electrical characteristics apply in both directions.
134 RATING AND CHARACTERISTIC CURVES (SA5.
0 THRU SA180CA) FIG.
1-PEAK PULSE POWER DERATING CURVE Non-Repetitive Pulse Waveform Shown in Fig.
3 TA=25 C 10 PEAK PULSE POW...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)