DatasheetsPDF.com

FXLA104

ON Semiconductor
Part Number FXLA104
Manufacturer ON Semiconductor
Description Low-Voltage Dual-Supply 4-Bit Voltage Translator
Published Oct 9, 2022
Detailed Description FXLA104 — Low-Voltage Dual-Supply 4-Bit Voltage Translator FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator wit...
Datasheet PDF File FXLA104 PDF File

FXLA104
FXLA104

Overview
FXLA104 — Low-Voltage Dual-Supply 4-Bit Voltage Translator FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator with Configurable Voltage Supplies and Signal Levels, 3-State Outputs, and Auto Direction Sensing Features  Bi-Directional Interface between Two Levels: from 1.
1V to 3.
6V  Fully Configurable: Inputs and Outputs Track VCC  Non-Preferential Power-Up; Either VCC May Be Powered Up First  Outputs Switch to 3-State if Either VCC is at GND  Power-Off Protection  Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports  Control Input (/OE) Referenced to VCCA Voltage  Available in 16-Terminal UMLP (1.
8mm x 2.
6mm) and 12-Terminal, Quad UMLP, 1.
8 x 1.
8mm Packages  Direction Control Not Necessary  100Mbps Throughput when Translating Between 1.
8V and 2.
5V  ESD Protection Exceeds: - 8kV HBM (per JESD22-A114 & Mil Std 883e 3015.
7) - 2kV CDM (per ESD STM 5.
3) Applications  Cell Phone, PDA, Digital Camera, Portable GPS Description The FXLA104 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels.
The device allows translation between voltages as high as 3.
6V to as low as 1.
1V.
The A port tracks the VCCA level and the B port tracks the VCCB level.
This allows for bi-directional voltage translation over a variety of voltage levels: 1.
2V, 1.
5V, 1.
8V, 2.
5V, and 3.
3V.
The device remains in three-state as long as either VCC=0V, allowing either VCC to be powered up first.
Internal power-down control circuits place the device in 3-state if either VCC is removed.
The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition.
The /OE input is supplied by VCCA.
The FXLA104 supports bi-directional translation without the need for a direction control pin.
The two ports of the device have auto-direction sense capability.
Either port may sense an input signal and transfer it as an output signal to ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)