DatasheetsPDF.com

SE2611T

Skyworks
Part Number SE2611T
Manufacturer Skyworks
Description 2.4GHz High Efficiency Wireless LAN/BT Front-End
Published Aug 16, 2021
Detailed Description DATA SHEET SE2611T: 2.4 GHz High Efficiency Wireless LAN/BT Front End Applications  IEEE 802.11b DSSS WLAN  IEEE 802....
Datasheet PDF File SE2611T PDF File

SE2611T
SE2611T


Overview
DATA SHEET SE2611T: 2.
4 GHz High Efficiency Wireless LAN/BT Front End Applications  IEEE 802.
11b DSSS WLAN  IEEE 802.
11g/n OFDM WLAN  Embedded applications with Bluetooth® (Mobile) Features  Dual mode IEEE802.
11b & IEEE802.
11g  Integrated PA, harmonic filter, LNA and BT port  Integrated positive slope power detector  19 dBm @ 4.
0 % EVM, 802.
11g, 54 Mbps  Simultaneous WLAN and Bluetooth receive mode  Direct connection to battery with 3.
3 V nominal supply  Lead-free, halogen-free, ROHS compliant QFN (20-pin, 3  3  0.
6 mm) package (MSL1, 260 C per JEDEC J-STD020) Skyworks Green™ products are compliant with all applicable legislation and are halogen-free.
For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074.
Description The SE2611T is a complete 802.
11 b/g/n WLAN RF front-end module with a Bluetooth port.
The device provides all the functionality of the power amplifier, power detector, filter, switch, Low Noise Amplifier (LNA), 2170 MHz notch filtering and associated matching.
The SE2611T provides a complete 2.
4 GHz WLAN RF solution from the output of the transceiver to the antennas, and from the antennas to the input of the transceiver, in an ultra-compact form factor.
The SE2611T is designed for ease of use, with all the critical matching and harmonic filtering integrated, also offering a simple 50  interface to the antenna.
The SE2611T includes a low noise amplifier to increase the receive sensitivity of embedded solutions to improve range or to overcome the insertion loss of cellular filters often included for mobile applications.
It offers simultaneous WLAN and Bluetooth receive mode.
The SE2611T also includes a transmitter power detector with 20 dB of dynamic range and a digital enable control for transmitter power ramp on/off control.
The power ramp rise/fall time is 0.
5 s typical.
The device package and pinout for the 20-pin QFN are shown in Figure 1.
A block diagram of the SE2611T is shown in Figure 2.
V...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)