High performance multiplexer/demultiplexer switch - NXP
Description
CBTL05024
High performance multiplexer/demultiplexer switch for Thunderbolt applications
Rev.
4 — 27 March 2014
Product data sheet
1.
General description
The CBTL05024 is a multiplexer/demultiplexer switch chip optimized to interface the Thunderbolt/MiniDP connector with Thunderbolt systems.
It supports 10.
3125 Gbit/s Thunderbolt or DisplayPort v1.
2 channels.
The TB MUX is a 3 : 1 switch that selects between Thunderbolt data path and DisplayPort v1.
2 side-band signals — either DDC or AUX.
The DP MUX is a 2 : 1 switch that selects between DP ML (DisplayPort Main Link) and LS TX/RX signals.
Both LSTX and LSRX are the side-band signals for Thunderbolt channel.
This chip also includes HPD and CA_DET buffers for HPD_IN and CA_DET control signals.
CBTL05024 is powered by a 3.
3 V supply and it is available in a 3 mm 3 mm HVQFN24 package with 0.
4 mm pitch.
2.
Features and benefits
2.
1 TB MUX 3 : 1 switch
This 3 : 1 switch is implemented by two cascaded 2 : 1 switches The first 2 : 1 10G MUX is controlled by TB_ENA, AUXIO_EN and DP_PD pins The second 2 : 1 AUX MUX is controlled by CA_DET signal multiplexing of the 720 Mbit/s Differential FAUX (or 1 Mbit/s AUX) and DDC (Direct Display Control) signals When CA_DET is HIGH, DDC path is selected
Differential TB channel Low insertion loss: 1.
3 dB at 5 GHz Low return loss: < 20 dB at 5 GHz Low ON-state resistance: 8 Bandwidth: 10 GHz Low off-state isolation: 20 dB at 5 GHz Low crosstalk: 36 dB at 5 GHz Differential input voltage VID: 1.
2 V (maximum)
Differential AUX channel Low insertion loss: 1.
1 dB at 5 MHz; 1.
8 dB at 360 MHz Low return loss: 18 dB at 5 MHz; 16 dB at 360 MHz
NXP Semiconductors
CBTL05024
High performance MUX/deMUX switch for Thunderbolt applications
Low ON-state resistance: 13 (typical); 16 (maximum) Bandwidth: 3 GHz Low off-state isolation: 80 dB at 5 MHz; 55 dB at 360 MHz Low crosstalk: 26 dB at 2.
7 GHz Common-mode input voltage VIC: 0 V to 3.
3 V...
Similar Datasheet