SMART ARM-based Embedded MCU - ATMEL
Description
SAM9XE Series
Atmel | SMART ARM-based Embedded MCU DATASHEET
Description
The Atmel® | SMART SAM9XE microcontroller series is based on the integration of an ARM926EJ-S™ processor with fast ROM, RAM and Flash, and a wide range of peripherals.
The embedded Flash memory can be programmed in-system via the JTAG-ICE interface or via a parallel interface on a production programmer prior to mounting.
Built-in lock bits, a security bit and MMU protect the firmware from accidental overwrite and preserve its confidentiality.
The SAM9XE series embeds an Ethernet MAC, one USB Device Port, and a USB Host Controller.
It also integrates several standard peripherals, including six UARTs, SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and a MultiMedia/SD Card Interface.
The SAM9XE system controller includes a reset controller capable of managing the power-on sequence of the microcontroller and the complete system.
Correct device operation can be monitored by a built-in brownout detector and a watchdog running off an integrated RC oscillator.
The SAM9XE series architecture includes a 6-layer matrix, allowing a maximum internal bandwidth of six 32-bit buses.
It also features an External Bus Interface capable of interfacing with a wide range of memory devices.
The pinout and ball-out are fully compatible with the Atmel | SMART SAM9260 eMPU with the exception that the pin BMS is replaced by the pin ERASE.
SAM9XE Embedded Internal Memories Configuration
Device
ROM
SRAM
SAM9XE128
32 KB
16 KB
SAM9XE256
32 KB
32 KB
SAM9XE512
32 KB
32 KB
High-speed Flash 128 KB 256 KB 512 KB
Atmel-6254E-ATARM-SAM9XE-Datasheet_20-Nov-15
Features
Incorporates the ARM926EJ-S ARM® Thumb® Processor ̶ DSP instruction Extensions, ARM Jazelle® Technology for Java® Acceleration ̶ 8 KB Data Cache, 16 KB Instruction Cache, Write Buffer ̶ 200 MIPS at 180 MHz ̶ Memory Management Unit ̶ EmbeddedICE, Debug Communication Channel Support
Additional Embedded Memories ̶ One 32 KB Internal ROM...
Similar Datasheet