Dot/Bar Display Driver - Texas Instruments
Description
LM3914
www.
ti.
com
SNVS761B – JANUARY 2000 – REVISED MARCH 2013
LM3914 Dot/Bar Display Driver
Check for Samples: LM3914
FEATURES
1
•2 Drives LEDs, LCDs or Vacuum Fluorescents
• Bar or Dot Display Mode Externally Selectable by User
• Expandable to Displays of 100 Steps
• Internal Voltage Reference from 1.
2V to 12V
• Operates with Single Supply of Less than 3V
• Inputs Operate Down to Ground
• Output Current Programmable from 2 mA to 30 mA
• No Multiplex Switching or Interaction Between Outputs
• Input Withstands ±35V without Damage or False Outputs
• LED Driver Outputs are Current Regulated, Open-collectors
• Outputs can Interface with TTL or CMOS Logic
• The Internal 10-step Divider is Floating and can be Referenced to a Wide Range of Voltages
DESCRIPTION
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display.
A single pin changes the display from a moving dot to a bar graph.
Current drive to the LEDs is regulated and programmable, eliminating the need for resistors.
This feature is one that allows operation of the whole system from less than 3V.
The circuit contains its own adjustable reference and accurate 10-step voltage divider.
The low-bias-current input buffer accepts signals down to ground, or V−, yet needs no protection against inputs of 35V above or below ground.
The buffer drives 10 individual comparators referenced to the precision divider.
Indication non-linearity can thus be held typically to ½%, even over a wide temperature range.
Versatility was designed into the LM3914 so that controller, visual alarm, and expanded scale functions are easily added on to the display system.
The circuit can drive LEDs of many colors, or low-current incandescent lamps.
Many LM3914s can be “chained” to form displays of 20 to over 100 segments.
Both ends of the voltage divider are externally available so that 2 drivers can be made into a zero-center meter.
The LM3914 is very easy to apply a...
Similar Datasheet
