Signal Isolated CAN-FD Transceiver - Analog Devices
Description
Data Sheet
FEATURES
5.
7 kV rms (8000 VPEAK) signal isolated CAN transceiver 1.
7 V to 5.
5 V supply range for VDD1 4.
5 V to 5.
5 V supply range for VDD2 ISO 11898-2:2016 compliant CAN FD Data rates up to 12 Mbps for CAN FD Low loop propagation delay of 150 ns maximum Extended common-mode range of ±25 V Bus fault protection (CANH, CANL) of ±40 V Low power standby supporting remote wake request Extra isolated signal for control (for example, termination
switches) Slope control for reduced EMI Safety and regulatory approvals (pending)
VDE Certificate of Conformity, VDE V 0884-10 VIORM = 849 VPEAK VIOSM = 8000 VPEAK (test: VPEAK = 12.
8 kV)
UL: 5700 V rms for 1 minute per UL 1577 CSA Component Acceptance 5A at 5 kV rms
IEC 60950, IEC 61010 8.
3 mm creepage/clearance with 16-lead SOIC package High common-mode transient immunity: ≥75 kV/μs Industrial temperature range: −40°C to +125°C
APPLICATIONS
CANOpen, DeviceNet, and other CAN bus implementations Solar inverters and battery management Motor and process control Industrial automation Transport and infrastructure
GENERAL DESCRIPTION
The ADM3056E is a 5.
7 kV rms isolated controller area network (CAN) physical layer transceiver.
The ADM3056E fully meets the CAN flexible data rate (CAN FD) CAN FD ISO 118982:2016 requirements and is further capable of supporting data rates as high as 12 Mbps.
The device employs Analog Devices, Inc.
, iCoupler® technology to combine a highly robust 3-channel isolator and a CAN transceiver into a single SOIC, surface-mount package.
The ADM3056E provides galvanic isolation between the CAN controller and physical layer bus.
Safety and regulatory approvals (pending) for 5.
7 kV rms isolation voltage, 849 VPEAK working insulation voltage, 8 kV surge, and 8.
3 mm creepage and clearance, ensure that the ADM3056E meets isolation requirements for high voltage applications.
Rev.
0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no
responsibility i...
Similar Datasheet
