Part Number
|
S32K142 |
Manufacturer
|
NXP |
Description
|
MCU |
Datasheet
|
S32K142 PDF File
|
Overview
NXP Semiconductors Data Sheet: Technical Data
Document Number S32K1XX Rev.
14, 08/2021
S32K1xx Data Sheet
Notes
• Supports S32K116, S32K118, S32K142, S32K142W, S32K144, S32K144W, S32K146, and S32K148 – Technical information for S32K142W and S32K144W device families is preliminary until these devices achieve qualification
• The following two attachments are available with the Datasheet: – S32K1xx_Orderable_Part_Number_ List.
xlsx – S32K1xx_Power_Modes_Configuration.
xlsx
Key Features
• Operating characteristics – Voltage range: 2.
7 V to 5.
5 V – Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 150 °C for RUN mode
• Arm™ Cortex-M4F/M0+ core, 32-bit CPU – Supports up to 112 MHz frequency (HSRUN mode) with 1.
25 Dhrystone MIPS per MHz – Arm Core based on the Armv7 Architecture and Thumb®-2 ISA – Integrated Digital Signal Processor (DSP) – Configurable Nested Vectored Interrupt Controller (NVIC) – Single Precision Floating Point Unit (FPU)
• Clock interfaces – 4 - 40 MHz fast external oscillator (SOSC) with up to 50 MHz DC external square input clock in external clock mode – 48 MHz Fast Internal RC oscillator (FIRC) – 8 MHz Slow Internal RC oscillator (SIRC) – 128 kHz Low Power Oscillator (LPO) – Up to 112 MHz (HSRUN) System Phased Lock Loop (SPLL) – Up to 20 MHz TCLK and 25 MHz SWD_CLK – 32 kHz Real Time Counter external clock (RTC_CLKIN)
S32K1XX
• Power management – Low-power Arm Cortex-M4F/M0+ core with excellent energy efficiency – Power Management Controller (PMC) with multiple power modes: HSRUN, RUN, STOP, VLPR, and VLPS.
Note: CSEc (Security) or EEPROM writes/ erase will trigger error flags in HSRUN mode (112 MHz) because this use case is not allowed to execute simultaneously.
The device will need to switch to RUN mode (80 MHz) to execute CSEc (Security) or EEPROM writes/erase.
– Clock gating and low power operation supported on specific peripherals.
• Memory and memory interfaces – Up to 2 MB program flash memory with ECC – 64 KB FlexNVM for ...
Similar Datasheet
- S32K116 MCU - NXP
- S32K118 MCU - NXP
- S32K142 MCU - NXP
- S32K144 MCU - NXP
- S32K146 MCU - NXP
- S32K148 MCU - NXP