F2MC-16LX MB90930 Series
The MB90930 series is a family of general-purpose FUJITSU SEMICONDUCTOR 16-bit microcontrollers de-
signed for applications such as vehicle instrument panel control.
The instruction set retains the AT architecture from the F2MC-8L and F2MC-16L families, with further refinements
including high-level language instructions, extended addressing modes, improved multiplication and division
operations (signed), and bit processing. In addition, long word processing is made possible by the inclusion of
a built-in 32-bit accumulator.
Note: F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
Built-in PLL clock frequency multiplication circuit.
Selection of machine clocks (PLL clocks) is allowed among frequency division by two on oscillation clock, and
multiplication of 1 to 8 times of oscillation clock (for 4 MHz oscillation clock, 4 MHz to 32 MHz).
Operation by sub clock (up to 50 kHz : 100 kHz oscillation clock divided by two) is allowed.
• 16-bit input capture (8 channels)
Detects rising, falling, or both edges.
16-bit capture register × 8
The value of a 16-bit free-run timer counter is latched upon detection of an edge input to pin and an interrupt
request is generated.
• 16-bit reload timer (4 channels)
16-bit reload timer operation (select toggle output or one-shot output)
Selectable event count function
For the information for microcontroller supports, see the following web site.
This web site includes the "Customer Design Review Supplement" which provides the latest cautions on
system development and the minimal requirements to be checked to prevent problems before the system
Copyright©2009-2010 FUJITSU SEMICONDUCTOR LIMITED All rights reserved