Home >> M-8880 Search >> Clare Inc. M-8880 Datasheet
M-8880 Datasheet
M-8880 DTMF Transceiver
Clare  Inc.
Clare Inc.


No Preview Available !

M-8880 pdf
M-8880 DTMF Transceiver
· Advanced CMOS technology for low power consump-
tion and increased noise immunity
· Complete DTMF transmitter/receiver in a single chip
· Standard 6500/6800 series microprocessor port
· Central office quality and performance
· Adjustable guard time
· Automatic tone burst mode
· Call progress mode
· Single +5 Volt power supply
· 20-pin DIP and SOIC packages
· 2 MHz microprocessor port operation
· Inexpensive 3.58 MHz crystal
· No continuous f2 clock required, only strobe
· Applications include: paging systems, repeater sys-
tems/mobile radio, interconnect dialers, PBX systems,
computer systems, fax machines, pay telephones,
credit card verification
The M-8880 is a complete DTMF Transmitter/Receiver that fea-
tures adjustable guard time, automatic tone burst mode, call
progress mode, and a fully compatible 6500/6800 microproces-
sor interface. The receiver portion is based on the industry stan-
dard M-8870 DTMF Receiver, while the transmitter uses a
switched-capacitor digital-to-analog converter for
low-distortion, highly accurate DTMF signaling. Tone bursts can
be transmitted with precise timing by making use of the auto-
matic tone burst mode. To analyze call progress tones, a call
progress filter can be selected by an external microprocessor.
Figure 1 Pin Diagram
Functional Description
M-8880 functions consist of a high-performance DTMF receiver
with an internal gain setting amplifier and a DTMF generator that
contains a tone burst counter for generating precise tone bursts
and pauses. The call progress mode, when selected, allows the
detection of call progress tones. A standard 6500/6800 series
microprocessor interface allows access to an internal status
register, two control registers, and two data registers.
Input Configuration
The input arrangement consists of a differential input opera-
tional amplifier and bias sources (VREF) for biasing the amplifier
inputs at VDD/2. Provisions are made for the connection of a
feedback resistor to the op-amp output (GS) for gain adjust-
40-406-00012, Rev. G
Figure 2 Block Diagram
Page 1
www.clare.com

M-8880 Datasheet PDF



Related Start with M-888*

[ M-8880 Clare Inc. ]     [ M-8888 Clare Inc. ]     [ M-8888-01 Clare Inc. ]     [ M-8888-01P Clare Inc. ]     [ M-8888-01SM Clare Inc. ]     [ M-8888-01T Clare Inc. ]     [ M-8870 Clare Inc. ]     [ M-8870 Clare ]     [ M-8870-01 Clare Inc. ]     [ M-8870-01SM Clare Inc. ]     [ M-8870-01SMTR Clare Inc. ]     [ M-8870-02 Clare Inc. ]     [ M-8870-02SM Clare Inc. ]     [ M-8870-02T Clare Inc. ]     [ M-8880 Clare Inc. ]     [ M-8888 Clare Inc. ]    


Searches related to M-8880 part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site