13.1 Sharp Edge Requirements
There will be no sharp edges or corners on the display assembly that could cause injury.
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they
will be reviewed and approved by the responsible AUO Toxicologist.
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process. The printed circuit board will be
made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed
14.0 Other requirements
14.1 Smoke Free Design
Any smoke nor strange smell shall not be observed by the operator at any single failure.
14.2 National Test Lab Requirement
The display module will satisfy all requirements for compliance to the following requirement:
UL 1950, First Edition
CSA C22.2 No.950-M89
EN 60 950
U.S.A. Information Technology Equipment
Canada, Information Technology Equipment
International, Information Technology Equipment
International, Information Processing Equipment
(European Norm for IEC950)
The construction of the display module is designed to suppress EMI. When mounted into a specified host
system, the system will meet the following EMI requirement:
FCC Part 15 Class B
VCCI Class 2
CISPR 22, class B
Taiwan CNS standard
China CCIB standard
(C) Copyright AU Optronics, Inc.
2004 All Rights Reserved.
No Reproduction and Redistribution Allowed
Datasheet pdf - http://www.DataSheet4U.net/