800MHz 4 Channel 2:1 Video Switch
Revised August 2005
The FSAV450 is a high performance Quad SPDT (2-to-1 multi-
plexer/demultiplexer) video switch designed specifically for
switching high definition YPbPr and computer RGB (up to
UXGA) signals. The bandwidth of this device is 800MHz (Typ)
which allows signals to pass with minimal edge and phase dis-
tortion. Image integrity is maintained with low crosstalk, high
OFF-Isolation and low differential gain and phase. The low On
:Resistance (4 typical) minimizes signal insertion loss. Low
voltage operation (3V), low power consumption (1uA maximum)
and small scale packaging (including leadless DQFN) make this
device ideal for a broad range of applications.
O 50dB OFF Isolation at 30MHz
O 80dB non-adjacent channel crosstalk at 30MHz
:O 4 typical On Resistance (RON)
O 3dB bandwidth: 800MHz
O Low power consumption (1uA max)
O Control input: TTL compatible
O RGB Video Switch in LCD, plasma and projector displays
Pb-Free 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241,
2.5 x 3.5mm
16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide
16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Note 1: DQFN package available in Tape and Reel only.
© 2005 Fairchild Semiconductor Corporation