Home >> D-607-10 Search >> Raychem D-607-10 Datasheet

D-607-10 Datasheet

Coaxial Cable Termination

No Preview Available !

D-607-10 pdf
Fax-on-Demand: (800) 260-9099
(650) 361-6523
Before ordering check with
factory for most current data.
FAX ID Description
5600 Data sheet
Applications
Used for terminating coaxial cable to printed circuit boards.
Features/Benefits
Provides a completely shielded, low-resistance, matched-
impedance termination with very low VSWR (D-607 series
only).
Transparent Kynar insulation sleeve provides encapsulation,
inspectability, strain relief, and insulation.
Prefluxed solder preform provides a controlled soldering
process.
One-piece design offers easy installation and lower installed
cost.
Preinstalled PCB termination body provides convenience and
ease of installation.
Coaxial Cable Termination
SolderSleeve PCB/coaxial cable terminators
www.DataSheet4U.com
Product Options
Product
series
D-607
B-046
Product Selection Process
Typical application performance
Matched impedance up to 2.3 GHz
Effective transmission up to 100 MHz
Shield method
Metal body
Pin to ground
1. Select product series from the Prod-
uct Options table above.
2. Determine cable RG number or out-
side diameter dimensions.
Table A. D-607 Series Part Numbers
3. Select the appropriate part number
from Table A (D-607 series) or Table B
(B-046 series).
For D-607 (matched impedance) series,
determine straight or right-angle entry to
PCB and grid pattern, then select the
appropriate part number from Table A
below.
For B-046 (PinPak, or pin to ground)
series, determine hole spacing and
diameter. Refer to Table B for product
selection (see illustration beneath Table
B for cable dimensions).
Cable dimensions (mm/in)
Max. outside diameter
RG cable number
Jacket
174, 178, 179,
316, 404
1.5–3.55
(.060–.140)
*Limited for use with RG 174, 178, and 404.
Shield
1.1–3.15
(.045–.125)
Dielectric
0.60–2.25
(.025–.090)
Part number
Entry to PCB
Straight
grid 5.08 (.200)
D-607-09
Right angle
grid 5.08 (.200)
D-607-10
Straight
grid 2.54 (.100)
D-607-40*
Users should independently evaluate the suitability of the product for their application.
R Electrical Interconnect Products 9-45
Raychem
Raychem



   PDF Click to Download PDF File

   PDF View for Mobile





Related Start with D-607-1*

[ D-607-10 Raychem ]     [ D-607-09 Raychem ]     [ D-607-10 Raychem ]     [ D-607-40 Raychem ]    


Searches related to D-607-10 part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site