Home >> ATMEGA1281V Search >> ATMEL ATMEGA1281V Datasheet

ATMEGA1281V Datasheet

8-bit Atmel Microcontroller

No Preview Available !

ATMEGA1281V datasheet pdf
When the addresses accessing the SRAM memory space exceeds the internal data memory locations, the exter-
nal data SRAM is accessed using the same instructions as for the internal data memory access. When the internal
data memories are accessed, the read and write strobe pins (PG0 and PG1) are inactive during the whole access
cycle. External SRAM operation is enabled by setting the SRE bit in the XMCRA Register.
Accessing external SRAM takes one additional clock cycle per byte compared to access of the internal SRAM.
This means that the commands LD, ST, LDS, STS, LDD, STD, PUSH, and POP take one additional clock cycle. If
the Stack is placed in external SRAM, interrupts, subroutine calls and returns take three clock cycles extra
because the three-byte program counter is pushed and popped, and external memory access does not take
advantage of the internal pipe-line memory access. When external SRAM interface is used with wait-state, one-
byte external access takes two, three, or four additional clock cycles for one, two, and three wait-states respec-
tively. Interrupts, subroutine calls and returns will need five, seven, or nine clock cycles more than specified in the
instruction set manual for one, two, and three wait-states.
The five different addressing modes for the data memory cover: Direct, Indirect with Displacement, Indirect, Indi-
rect with Pre-decrement, and Indirect with Post-increment. In the Register file, registers R26 to R31 feature the
indirect addressing pointer registers.
The direct addressing reaches the entire data space.
The Indirect with Displacement mode reaches 63 address locations from the base address given by the Y-register
or Z-register.
When using register indirect addressing modes with automatic pre-decrement and post-increment, the address
registers X, Y, and Z are decremented or incremented.
The 32 general purpose working registers, 64 I/O registers, and the 4,196/8,192 bytes of internal data SRAM in the
ATmega640/1280/1281/2560/2561 are all accessible through all these addressing modes. The Register File is
described in “General Purpose Register File” on page 13.
ATmega640/V-1280/V-1281/V-2560/V-2561/V [DATASHEET]

   PDF Click to Download PDF File

Related Start with ATMEGA1281*

[ ATMEGA1281 ATMEL Corporation ]     [ ATMEGA1281V ATMEL ]     [ ATMEGA128 ATMEL Corporation ]     [ ATMEGA1280 ATMEL Corporation ]     [ ATMEGA1280V ATMEL ]     [ ATMEGA1281 ATMEL Corporation ]     [ ATMEGA1281V ATMEL ]     [ ATMEGA1284 ATMEL Corporation ]     [ ATMEGA1284 ATMEL ]     [ ATMEGA1284P ATMEL Corporation ]     [ ATMEGA1284P ATMEL ]     [ ATMEGA1284RFR2 ATMEL ]    

Searches related to ATMEGA1281V part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site