Home >> ATMEL ATMEGA1281V Datasheet

(Datasheet) ATMEGA1281V

8-bit Atmel Microcontroller

No Preview Available !

ATMEGA1281V pdf
flag is cleared by software. Similarly, if one or more interrupt conditions occur while the Global Interrupt Enable bit
is cleared, the corresponding Interrupt Flag(s) will be set and remembered until the Global Interrupt Enable bit is
set, and will then be executed by order of priority.
The second type of interrupts will trigger as long as the interrupt condition is present. These interrupts do not nec-
essarily have Interrupt Flags. If the interrupt condition disappears before the interrupt is enabled, the interrupt will
not be triggered.
When the AVR exits from an interrupt, it will always return to the main program and execute one more instruction
before any pending interrupt is served.
Note that the Status Register is not automatically stored when entering an interrupt routine, nor restored when
returning from an interrupt routine. This must be handled by software.
When using the CLI instruction to disable interrupts, the interrupts will be immediately disabled. No interrupt will be
executed after the CLI instruction, even if it occurs simultaneously with the CLI instruction. The following example
shows how this can be used to avoid interrupts during the timed EEPROM write sequence.
Assembly Code Example
in r16, SREG ; store SREG value
cli ; disable interrupts during timed sequence
sbi EECR, EEMPE ; start EEPROM write
out SREG, r16 ; restore SREG value (I-bit)
C Code Example
char cSREG;
cSREG = SREG; /* store SREG value */
/* disable interrupts during timed sequence */
EECR |= (1<<EEMPE); /* start EEPROM write */
EECR |= (1<<EEPE);
SREG = cSREG; /* restore SREG value (I-bit) */
When using the SEI instruction to enable interrupts, the instruction following SEI will be executed before any pend-
ing interrupts, as shown in this example.
Assembly Code Example
sei ; set Global Interrupt Enable
sleep; enter sleep, waiting for interrupt
; note: will enter sleep before any pending
; interrupt(s)
C Code Example
__enable_interrupt(); /* set Global Interrupt Enable */
__sleep(); /* enter sleep, waiting for interrupt */
/* note: will enter sleep before any pending interrupt(s) */
ATmega640/V-1280/V-1281/V-2560/V-2561/V [DATASHEET]

PDF Download ATMEGA1281V PDF File

PDF View ATMEGA1281V for Mobile

Related Start with ATMEGA1281*

[ ATMEGA1281 ATMEL Corporation ]     [ ATMEGA1281V ATMEL ]     [ ATMEGA128 ATMEL Corporation ]     [ ATMEGA1280 ATMEL Corporation ]     [ ATMEGA1280V ATMEL ]     [ ATMEGA1281 ATMEL Corporation ]     [ ATMEGA1281V ATMEL ]     [ ATMEGA1284 ATMEL Corporation ]     [ ATMEGA1284 ATMEL ]     [ ATMEGA1284P ATMEL Corporation ]     [ ATMEGA1284P ATMEL ]     [ ATMEGA1284RFR2 ATMEL ]    

Searches related to ATMEGA1281V part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site