High Speed, ESD-Protected, Full-Duplex,
iCoupler®, Isolated RS-485 Transceiver
Isolated, full-duplex RS-485/RS-422 transceiver
±8 kV ESD protection on RS-485 input/output pins
16 Mbps data rate
Complies with ANSI TIA/EIA RS-485-A-1998 and
ISO 8482: 1987(E)
Suitable for 5 V or 3 V operation (VDD1)
High common-mode transient immunity: >25 kV/μs
Receiver has open-circuit, fail-safe design
32 nodes on the bus
Thermal shutdown protection
Safety and regulatory approvals pending
UL recognition: 5000 V rms isolation voltage
for 1 minute per UL 1577
VDE certificate of conformity
DIN EN 60747-5-2 (VDE 0884 Part 2): 2003-01
DIN EN 60950 (VDE 0805): 2001-12; EN 60950: 2000
VIORM = 848 VPEAK
Operating temperature range: −40°C to +105°C
Wide-body, 16-lead SOIC package
Isolated RS-485/RS-422 interfaces
Industrial field networks
Multipoint data transmission systems
FUNCTIONAL BLOCK DIAGRAM
The ADM2490E is an isolated data transceiver with ±8 kV ESD
protection and is suitable for high speed, full-duplex
communication on multipoint transmission lines. It is designed
for balanced transmission lines and complies with ANSI
TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E). The device
employs Analog Devices, Inc., iCoupler technology to combine
a 2-channel isolator, a 3-state differential line driver, and a
differential input receiver into a single package.
The differential transmitter outputs and receiver inputs feature
electrostatic discharge circuitry that provides protection to
±8 kV using the human body model (HBM). The logic side of
the device can be powered with either a 5 V or a 3 V supply,
whereas the bus side requires an isolated 5 V supply.
The device has current-limiting and thermal shutdown features
to protect against output short circuits and situations where bus
contention could cause excessive power dissipation.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
©2006 Analog Devices, Inc. All rights reserved.