Home >> AD5170 Search >> Analog Devices AD5170 Datasheet

AD5170 Datasheet

I2C Digital Potentiometer

No Preview Available !

AD5170 pdf
256-Position, Two-Time Programmable,
I2C Digital Potentiometer
AD5170
FEATURES
256-position digital potentiometer
Two-time programmable (TTP) set-and-forget resistance
setting allows second-chance permanent programming
Unlimited adjustments prior to one-time programming
(OTP) activation
OTP overwrite allows dynamic adjustments with user-
defined preset
End-to-end resistance: 2.5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ
Compact 10-lead MSOP: 3 mm × 4.9 mm package
Fast settling time: tS = 5 μs typical in power-up
Full read/write of wiper register
Power-on preset to midscale
Extra package address decode pins: AD0 and AD1
Single supply: 2.7 V to 5.5 V
Low temperature coefficient: 35 ppm/°C
Low power: IDD = 6 μA maximum
Wide operating temperature: −40°C to +125°C
Evaluation board and software are available
Software replaces MicroConverter® in factory programming
applications
APPLICATIONS
Systems calibration
Electronics level setting
Mechanical trimmers replacement in new designs
Permanent factory PCB settings
Transducer adjustment of pressure, temperature, position,
chemical, and optical sensors
RF amplifier biasing
Automotive electronics adjustments
Gain control and offset adjustments
GENERAL DESCRIPTION
The AD5170 is a 256-position, two-time programmable, digital
potentiometer1 that employs fuse link technology, giving users
two opportunities to permanently program the resistance setting.
For users who do not need to program the digital potentiometer
setting in memory more than once, the OTP feature is a cost-
effective alternative to EEMEM. The AD5170 performs the same
electronic adjustment function as mechanical potentiometers or
variable resistors with enhanced resolution, solid-state reliability,
and superior low temperature coefficient performance.
The AD5170 is programmed using a 2-wire, I2C®-compatible
digital interface. Unlimited adjustments are allowed before
permanently setting the resistance value, and there are two
opportunities for permanent programming. During OTP
1 The terms digital potentiometer, VR, and RDAC are used interchangeably.
Rev. G
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
FUNCTIONAL BLOCK DIAGRAM
AW
B
VDD
GND
AD0
AD1
SDA
SCL
FUSE
1 LINKS 2
RDAC
REGISTER
ADDRESS
DECODE
8
SERIAL INPUT
REGISTER
Figure 1.
activation, a permanent blow fuse command freezes the wiper
position (analogous to placing epoxy on a mechanical trimmer).
Unlike traditional OTP digital potentiometers, the AD5170 has
a unique temporary OTP overwrite feature that allows for new
adjustments even after the fuse is blown. However, the OTP setting
is restored during subsequent power-up conditions. This feature
allows users to treat these digital potentiometers as volatile poten-
tiometers with a programmable preset.
For applications that program the AD5170 at the factory, Analog
Devices, Inc., offers device programming software that runs on
Windows NT®, Windows® 2000, and Windows XP operating
systems. This software effectively replaces any external I2C con-
trollers, thus enhancing the time-to-market of the user’s systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2003–2011 Analog Devices, Inc. All rights reserved.
Analog Devices
Analog Devices



   PDF Click to Download PDF File

   PDF View for Mobile





Related Start with AD517*

[ AD5170 Analog Devices ]     [ AD5171 Analog Devices ]     [ AD5172 Analog Devices ]     [ AD5173 Analog Devices ]     [ AD5174 Analog Devices ]     [ AD5175 Analog Devices ]     [ AD510 Analog Devices ]     [ AD5100 Analog Devices ]     [ AD5110 Analog Devices ]     [ AD5111 Analog Devices ]     [ AD5112 Analog Devices ]     [ AD5113 Analog Devices ]     [ AD5114 Analog Devices ]     [ AD5115 Analog Devices ]     [ AD5116 Analog Devices ]     [ AD5121 Analog Devices ]    


Searches related to AD5170 part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site