Home >> AD5162 Search >> Analog Devices AD5162 Datasheet
AD5162 Datasheet
SPI Digital Potentiometer
Analog Devices
Analog Devices


No Preview Available !

AD5162 pdf
LAYOUT AND POWER SUPPLY BYPASSING
It is good practice to employ compact, minimum lead length
layout design. The leads to the inputs should be as direct as
possible with a minimum conductor length. Ground paths
should have low resistance and low inductance.
Similarly, it is also good practice to bypass the power supplies with
quality capacitors for optimum stability. Supply leads to the device
should be bypassed with disc or chip ceramic capacitors of 0.01 μF
to 0.1 μF. Low ESR 1 μF to 10 μF tantalum or electrolytic capacitors
should also be applied at the supplies to minimize any transient
disturbance and low frequency ripple (see Figure 39). In addition,
note that the digital ground should be joined remotely to the
analog ground at one point to minimize the ground bounce.
VDD C3 + C1
10F 0.1F
VDD
AD5162
GND
Figure 39. Power Supply Bypassing
CONSTANT BIAS TO RETAIN RESISTANCE SETTING
For users who desire nonvolatility but cannot justify the additional
cost of the EEMEM, the AD5162 can be considered a low cost
alternative by maintaining a constant bias to retain the wiper
setting. The AD5162 is designed specifically for low power
applications, allowing low power consumption even in battery-
operated systems. The graph in Figure 40 demonstrates the
power consumption from a 3.4 V, 450 mAhr Li-Ion cell phone
battery connected to the AD5162. The measurement over time
shows that the device draws approximately 1.3 μA and consumes
negligible power. Over a course of 30 days, the battery is depleted
by less than 2%, the majority of which is due to the intrinsic
leakage current of the battery itself.
This demonstrates that constantly biasing the potentiometer can be
a practical approach. Most portable devices do not require the
removal of batteries for the purpose of charging. Although the
resistance setting of the AD5162 is lost when the battery needs
replacement, such events occur rather infrequently such that
this inconvenience is justified by the lower cost and smaller size
offered by the AD5162. If total power is lost, the user should be
provided with a means to adjust the setting accordingly.
AD5162
110
108
TA = 25°C
106
104
102
100
98
96
94
92
90
0 5 10 15 20 25
DAYS
Figure 40. Battery Operating Life Depletion
30
EVALUATION BOARD
An evaluation board, along with all necessary software, is
available to program the AD5162 from any PC running
Windows® 98/2000/XP. The graphical user interface, as shown
in Figure 41, is straightforward and easy to use. More detailed
information is available in the user manual, which is supplied
with the board.
Figure 41. AD5162 Evaluation Board Software
The AD5162 starts at midscale upon power-up. To increment or
decrement the resistance, simply move the scrollbars in the left of
the software window (see Figure 41). To write a specific value,
use the bit pattern in the upper part of the SDI Write Bit Control
(Hit Run) box and then click Run. The format of writing data
to the device is shown in Table 8.
Rev. C | Page 15 of 20

AD5162 Datasheet PDF



Related Start with AD516*

[ AD516 ETC ]     [ AD5160 Analog Devices ]     [ AD5161 Analog Devices ]     [ AD5162 Analog Devices ]     [ AD5165 Analog Devices ]     [ AD51652 Elite Semiconductor ]     [ AD5165A Elite Semiconductor ]     [ AD516A American Microsemiconductor ]     [ AD516B American Microsemiconductor ]     [ AD510 Analog Devices ]     [ AD5100 Analog Devices ]     [ AD5110 Analog Devices ]     [ AD5111 Analog Devices ]     [ AD5112 Analog Devices ]     [ AD5113 Analog Devices ]     [ AD5114 Analog Devices ]     [ AD5115 Analog Devices ]     [ AD5116 Analog Devices ]     [ AD5121 Analog Devices ]    


Searches related to AD5162 part

Find Chips CBC RS online RUTRONIK 24
Component Distributors NexGen Digital Richardson RFPD ICC
Beyond Components NAC PEI-Genesis Powell Electronics
TME Ameya 360 Power & Signal Datasheets360
Freelance Electronics Sager Electronics Terminals & Connectors TTI

0  1  2  3  4  5  6  7  8  9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
@ 2014 :: DatasheetsPDF.com :: Semiconductors Datasheet Search & Download Site