Vertical DMOS FETs
►►Free from secondary breakdown
►►Low power drive requirement
►►Ease of paralleling
►►Low CISS and fast switching speeds
►►Excellent thermal stability
►►Integral source-drain diode
►►High input impedance and high gain
►►Power supply circuits
►►Drivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
The Supertex 2N7002 is an enhancement-mode (normally-
off) transistor that utilizes a vertical DMOS structure
and Supertex’s well-proven silicon-gate manufacturing
process. This combination produces a device with the
power handling capabilities of bipolar transistors, and the
high input impedance and positive temperature coefficient
inherent in MOS devices. Characteristic of all MOS
structures, this device is free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a
wide range of switching and amplifying applications where
very low threshold voltage, high breakdown voltage, high
input impedance, low input capacitance, and fast switching
speeds are desired.
-G denotes a lead (Pb)-free / RoHS compliant package.
Contact factory for Wafer / Die availablity.
Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant.
Absolute Maximum Ratings
Operating and storage temperature -55°C to +150°C
Absolute Maximum Ratings are those values beyond which damage to the device
may occur. Functional operation under these conditions is not implied. Continuous
operation of the device at the absolute rating level may affect device reliability. All
voltages are referenced to device ground.
Typical Thermal Characteristics
* Mounted on FR4 board; 25mm x 25mm x 1.57mm
W = Code for week sealed
= “Green” Packaging
Package may or may not include the following marks: Si or